HIT-16 Hydraulic Drive One Unit

The HABEGGER manual wire rope hoist HIT-16 can be converted to a hydraulic drive in a straightforward procedure.  The direction is changed by shifting the cylinder attachment from the forwards to the reverse lever.  The hydraulic unit is separate.  One or two units can be operated at the same time, depending on the hydraulic drive.

The Hydraulic Drive with HIT-16 one unit includes the following

* Hydraulic Group Gas Motor with 1 connection: Article #00529 (HB 1)
* Manual Hoist HIT-16 (without rope): Article #00799
* Hydraulic Cylinder: Article #00555
* Support for Hydraulic Cylinder: Article #00857
* 3 Meter Hydraulic Hose: Article #00450
* 5 Liters Oil: Article #00544

Specifications

Dimensions: 98 x 36 x 12cm
Rated Force: 1600kg
Speed Forwards/lift: 2m/min
Speed Reverse/lower: 2.0m/min
Weight without rope: 20.7kg

Wire Ropes

Wire rope for the HIT-TRAC 128E is available on request. It is recommended that only Habegger wire ropes be used with their hoists. Use of any other wire rope will nullify the warranty.

Downloads